United States of America

  • Iowa:

    (855) 556-6863
  • Corporate Headquarters:
    850 Stephenson Hwy
    Suite 612
    Troy, Michigan 48083
    (888) 451-2519
  • California Office:
    4701 Patrick Henry Drive
    Suite 6
    Santa Clara, CA 95054
    (888) 583-1930
  • New Jersey Office:
    197 State Route 18
    Suite 205 (North Tower)
    East Brunswick, New Jersey 08816
    (732) 642-7164
  • Virgina Office:
    44081 Pipeline Plaza, Suite 100
    Ashburn, Virginia 20147
    (312) 533-1673
  • Texas Office:
    6136 Frisco Square Blvd.
    Suite 400
    Frisco, Texas 75034
    (214) 984-0636
  • Virginia Office:
    3900 Westerre Parkway
    Suite 300
    Richmond, Virginia 23233
    (804) 916-0905
  • Virginia Office:
    44081 Pipeline Plaza
    Suite 100
    Ashburn, Virginia 20147
    (703) 726-7592
  • Florida Office:
    2202 N. West Shore Blvd, Suite 200
    Tampa, Florida, 33607
    (855) 930-3562
  • Georgia Office:
    11340 Lakefield Drive, Suite 200 Duluth, GA 30097
    (770) 842-1655
  • North Carolina Office:
    3440 Toringdon Way
    Suite 205
    Charlotte 28277
    (855) 569-3537
  • New York Office:
    140 Broadway
    46th Floor
    New York, New York 10005
    (888) 993-3416
  • Michigan Office:
    250 Monroe NW,
    Suite 400
    Grand Rapids, Michigan 49503
    (855) 569-3537
  • Ohio Office:
    8044 Montgomery Road,
    Suite 700, Cincinnati,
    Ohio, 45236
    (855) 418-5867

*Secondary Locations in Davenport, IA; Columbus, OH; Washington, DC; Tampa, FL; Minneapolis, MN; Raleigh, NC.

India Offices

  • ICONMA Professional Services & Solutions Pvt. Ltd.:
    #301-305, 3rd Floor, Tower III, Fortune 9 Bldg.,
    Somajiguda, Raj Bhavan Road
    Hyderabad 500082, Telangana, India
    Tel: +91 40 23406002

  • Global Development Center:
    3rd Floor, 7-1-79, Survey No-77, Anand Capital Building, Greenlands, Hyderabad. Telangana, India 500016.
    (+91) 040-42624000,040-23356002
  • Hyderabad Office:
    3rd Floor,
    7-1-79, Survey No-77,
    Anand Capital Building,
    Greenlands, Hyderabad.
    Telangana, India 500016.

    (+91) 040-42624000,040-23356002
  • Noida Office:
    ARV Park, H-28, 3rd floor, Sector-63
    Uttar Pradesh
    India 201301
    (+91) 0120-4109559, 0120-4349559

Canada Office

  • Canada Office:
    7111 Syntex Drive
    3rd Floor
    Ontario Canada L5N 8C3
    (855) 775-1066

Engineering Technician

June 23, 2016


Location : Cedar Falls, IA

Description :

Performs basic product design, testing and/or analysis work for a defined portion of a project. Operates in a team environment, providing input to design solutions and participating in design reviews. Develops recommendations within established guidelines; work and decisions are reviewed by supervisors before implementation.

Applies existing applications to routine problems. Produces and/or evaluates possible design solutions to improve cost, quality and performance based on specialized knowledge of engineering applications. This may include possible involvement of other functional engineers, supply management and/or supplier personnel. Analyzes assignments and determines engineering specifications which must be fulfilled for routine problems or projects. Compiles and furnishes necessary information (engineering decisions and reports of pertinent design analyses data) to document the design solution required for building of prototypes and adoption of the design with possible involvement of other functional engineers, supply management and/or supplier personnel. Learns and applies company engineering policies and practices; learns company products. Executes test or analysis plan for product verification and validation.

Specific Position Requirements:
Support engine and component testing in a laboratory environment. Maintain and update the database of engine test requests. Familiarity with solid modeling is a strong plus to support test cell fixture design, fabrication, and documentation. Looking for a candidate with a 4 year Engineering or Industrial Technology degree. Laboratory and testing experience is a plus.

Most important, specific duties of this position:
The position would support and coordinate testing of new designs and technologies, process, and report data from these tests. This may include writing test plans and working with other engineering disciplines to provide parts and coordinate data collection. In addition, this position may be responsible for running onsite component-level bench tests.

Typical issues or problems this position must frequently address:
Most typical issues encountered by this position will be related to the support of testing efforts in the lab. These may include debugging, documenting, and communicating electronic issues, component failures, or scheduling issues.

For the data processing and reporting, there may be software hurdles to overcome not only during the initial learning curve, but also in dealing with data issues coming from the testing activities.

With sufficient Pro/E skills, this position may be responsible for designing new test fixtures to enable component-level testing of new designs.

Most complex issues or problems this position must frequently address:
From a technical perspective, the most complex problems would be related to troubleshooting test issues in the lab and/or developing new fixture designs. However, from an interpersonal perspective, this person may need to communicate issues to co-workers and suppliers, both foreign and domestic.

Impact to Organization
Duties/responsibilities added to or removed from this position:
This position is relatively new in the organization and was created to respond to the larger role PV&V is playing in new technology development projects. PV&V is striving to conduct testing earlier in the program, and, therefore, added resources are needed to support these activities. Due to the nature of new technology development projects, responsibilities in this position are expected to be relatively fluid and will change depending upon the phase of development and learning.

New duties/responsibilities come from other individuals within your department, unit, or the Enterprise:
The responsibilities are consistent with those being fulfilled by the current position holder.

Required Skills, Knowledge, & Relevant Work Experience:
– Strong Computer Proficiency particularly in data analysis software (i.e. Excel, Matlab, DIAdem)
– Strong Communication skills and teamwork
– Familiarity with 3D modeling
– Familiarity with computer programming
– Enthusiasm and desire to learn

Desired Skills, Knowledge & Relevant Work Experience:
– Experience in Visual Basic programming
– Experience with Diesel Engine Systems

About Company:

ICONMA is a nationwide consulting firm with corporate headquarters in Troy, MI, providing Professional Staffing and Project Based Services and Solutions for Fortune 1000 clients in a broad range of industries. Core Industries served include: Biotech/Pharmaceutical, Cable, Clinical, Consumer Services, Energy, Engineering, Financial Services, Food & Beverage, Government/Defense, Healthcare, Insurance, Logistics, Manufacturing, Media, Mortgage, Oil & Gas, Pharmaceutical, Retail, Scientific, Services, Technology, Telecommunications, Transportation, and Utilities.
ICONMA is a certified Woman-Owned “Woman-Owned Business Enterprise”, certified by Women’s Business Enterprise National Council (WBENC) and National Women Business Owners Corporation (NWBOC).
The company was founded on the principle that success is derived from delivering high quality service and resources in the most responsive, flexible, and innovative way. ICONMA invests in people and resources with a single goal: To provide our customers with the highest quality service in the most responsive manner.
We measure success by the results of our customers. As a business partner, we know that world-class service and cost effective solutions are the primary keys to success. ICONMA uses technical expertise and business knowledge to help customers achieve these objectives.

Email : prakash@iconma.com

Tele Phone :(732)374-3541

Toll Free : (732)374-3541